clear ppp statistics
To clear all Point-to-Point Protocol (PPP) statistics for a PPP interface, use the clear ppp statistics command
in EXEC mode.
clear ppp statistics interface interface-path-id
Syntax Description
Physical interface or virtual interface.
Use the show interfaces command to see a list of all interfaces currently
configured on the router.
Note
For more information about the syntax for the router, use the question mark (?)
online help function.
interface interface-path-id
Command Default
No default behavior or values
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.9.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
executeppp
Examples
The following example shows how to clear PPP statistics for a PPP interface:
RP/0/RSP0/CPU0:router# clear ppp statistics interface 0/1/0/1
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
713
PPP Commands onthe Cisco ASR 9000 Series Router
clear ppp statistics
To Next Page
Loading...
Need help?
General
