Examples
In the following example, the interface command is given for the card in location 0/2/0/1, and interface
configuration mode is entered for that interface:
RP/0/RSP0/CPU0:router(config)# interface POS 0/2/0/1
Related Commands
DescriptionCommand
Clears interface statistics or packet counters.clear interface, on page 497
Disables an interface (forces an interface to be administratively
down).
shutdown (global), on page 531
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
502
Global Interface Commandsonthe Cisco ASR 9000 Series Router
interface (global)
To Next Page
Loading...
Need help?
General
