show lldp
To display the global Link Layer Discovery Protocol (LLDP) operational characteristics on the system, use
the show lldp command in EXEC configuration mode.
show lldp
Syntax Description
This command has no keywords or arguments.
Command Default
None
Command Modes
EXEC (#)
Command History
ModificationRelease
This command was introduced.Release 4.1.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
The show lldp command displays the LLDP operational characteristics when LLDP is enabled globally on
the system using the lldp command. The settings for the following commands are displayed:
•
lldp timer
•
lldp holdtime
•
lldp reinit
Task ID
OperationTask ID
readethernet-services
Examples
Example 1
The following example shows the default LLDP operational characteristics when LLDP is enabled globally
on the system:
RP/0/RSP0/CPU0:router# show lldp
Wed Apr 13 06:16:45.510 DST
Global LLDP information:
Status: ACTIVE
LLDP advertisements are sent every 30 seconds
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
110
Ethernet Interface Commands on the Cisco ASR 9000 Series Router
show lldp
To Next Page
Loading...
Need help?
General
