small-frame-padding
To enable small frame padding on physical interfaces, use the small-frame-padding command in the interface
configuration mode. To disable small frame padding, use the no form of this command.
small-frame-padding interface-path-id
nosmall-frame-padding
Syntax Description
Physical interface type.
interface-path-id
Command Default
None
Command Modes
Interface Configuration mode
Command History
ModificationRelease
This command was introduced.Release 4.3.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
This command is applicable for all physical interfaces on all types of Cisco ASR 9000 Series Router line
cards except Cisco ASR 9000 Ethernet line cards.
Note
Task ID
OperationTask ID
read, writeinterface
Examples
This example shows how to use the small-frame-padding command:
RP/0/RSP0/CPU0:router(config)# interface GigabitEthernet 0/4/0/0
RP/0/RSP0/CPU0:router(config-if)# small-frame-padding
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
125
Ethernet Interface Commands on the Cisco ASR 9000 Series Router
small-frame-padding
To Next Page
Loading...
Need help?
General
