Command History
ModificationRelease
This command was introduced.Release 3.9.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
readdwdm
readinterface
readsonet-sdh
Examples
The following examples show sample output for a DWDM controller:
RP/0/RSP0/CPU0:Router# show controller dwdm 0/5/0/0 pm interval 15-min fec 0
Thu Jul 1 18:58:09.353 UTC
g709 FEC in the current interval [18:45:00 - 18:58:09 Thu Jul 1 2010]
EC-BITS : 0 Threshold : 0 TCA(enable) : NO
UC-WORDS : 0 Threshold : 0 TCA(enable) : NO
RP/0/RSP0/CPU0:Router# show controller dwdm 0/5/0/0 pm history 15-min
Thu Jul 1 18:59:04.585 UTC
g709 OTN in the current interval [18:45:00 - 18:59:04 Thu Jul 1 2010]
ES-SM-NE : 0 Threshold : -1 TCA(enable) : NO
ESR-SM-NE : 0 Threshold : -1 TCA(enable) : NO
SES-SM-NE : 0 Threshold : -1 TCA(enable) : NO
SESR-SM-NE : 0 Threshold : -1 TCA(enable) : NO
UAS-SM-NE : 0 Threshold : -1 TCA(enable) : NO
BBE-SM-NE : 0 Threshold : -1 TCA(enable) : NO
BBER-SM-NE : 0 Threshold : -1 TCA(enable) : NO
FC-SM-NE : 0 Threshold : -1 TCA(enable) : NO
ES-PM-NE : 0 Threshold : -1 TCA(enable) : NO
ESR-PM-NE : 0 Threshold : -1 TCA(enable) : NO
SES-PM-NE : 0 Threshold : -1 TCA(enable) : NO
SESR-PM-NE : 0 Threshold : -1 TCA(enable) : NO
UAS-PM-NE : 0 Threshold : -1 TCA(enable) : NO
BBE-PM-NE : 0 Threshold : -1 TCA(enable) : NO
BBER-PM-NE : 0 Threshold : -1 TCA(enable) : NO
FC-PM-NE : 0 Threshold : -1 TCA(enable) : NO
ES-SM-FE : 0 Threshold : -1 TCA(enable) : NO
ESR-SM-FE : 0 Threshold : -1 TCA(enable) : NO
SES-SM-FE : 0 Threshold : -1 TCA(enable) : NO
SESR-SM-FE : 0 Threshold : -1 TCA(enable) : NO
UAS-SM-FE : 0 Threshold : -1 TCA(enable) : NO
BBE-SM-FE : 0 Threshold : -1 TCA(enable) : NO
BBER-SM-FE : 0 Threshold : -1 TCA(enable) : NO
FC-SM-FE : 0 Threshold : -1 TCA(enable) : NO
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
64
Dense Wavelength Division Multiplexing Commands on the Cisco ASR 9000 Series Router
show controller dwdm pm
To Next Page
Loading...
Need help?
General
