Related Commands
DescriptionCommand
Configures what action is taken on an interface when a
connection timeout occurs.
action discovery-timeout, on page 139
Enables Ethernet Link OAM, with default values, on an
interface and enter interface Ethernet OAM configuration mode.
ethernet oam, on page 212
Creates an EOAM profile and enters EOAM configuration
mode.
ethernet oam profile, on page 215
Displays the current active Ethernet OAM configuration on an
interface.
show ethernet oam configuration, on page
366
Displays the current status of Ethernet OAM sessions.show ethernet oam discovery, on page 369
Displays the current state of Ethernet OAM interfaces.show ethernet oam interfaces, on page 374
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
189
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
connection timeout
To Next Page
Loading...
Need help?
General
