Task ID
OperationsTask ID
read, writeinterface
Examples
This example shows how to configure the 10GE interface for transmit-only mode:
RP/0/RSP0/CPU0:router# config
RP/0/RSP0/CPU0:router(config)# interface TenGigE 0/1/0/1
RP/0/RSP0/CPU0:router(config-if)# transport-mode tx-only
RP/0/RSP0/CPU0:router(config-if)# commit
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
129
Ethernet Interface Commands on the Cisco ASR 9000 Series Router
transport-mode
To Next Page
Loading...
Need help?
General
