Examples
The following example shows how to start a loopback at the far end of an Ethernet OAM interface.
RP/0/RSP0/CPU0:router# ethernet oam loopback enable tengigabitethernet 0/6/1/0
Related Commands
DescriptionCommand
Enables a remote loopback on the far end of an Ethernet
OAM interface.
remote-loopback, on page 303
Configures what action is taken on an interface when a
remote-loopback event occurs.
action remote-loopback, on page 145
snmp-server traps ethernet oam events, on page
401
Displays the current active Ethernet OAM configuration
on an interface.
show ethernet oam configuration, on page 366
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
214
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
ethernet oam loopback
To Next Page
Loading...
Need help?
General
