sla operation
To create an operation instance from a maintenance end point (MEP) to a specified destination, use the sla
operation command in interface CFM MEP configuration mode. To remove the operation, use the no form
of this command.
sla operation profile profile-name target {mep-id id| mac-address mac-address}
no sla operation profile profile-name target {mep-id id| mac-address mac-address}
Syntax Description
Name of the profile to assign this operation.
profile profile-name
Destination MEP ID. The range is 1 to 8191.
target mep-id id
Destination MAC address in standard hexadecimal format,
hh:hh:hh:hh:hh:hh.
mac-address mac-address
Command Default
No operations are configured
Command Modes
Interface CFM MEP configuration (config-if-cfm-mep)
Command History
ModificationRelease
This command was introduced.Release 3.9.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
The sla operation command is supported on all Ethernet interfaces.
Multiple SLA operation instances may be configured under each MEP, and may have different targets, and
may be assigned to different profiles.
If an operation is assigned to a nonexistent profile, a warning message is issued, and the offending configuration
is shown in the output of the related show commands.
Changing the configuration of an SLA operation is equivalent to deleting the operation and creating a new
operation. All stored data for the operation is discarded.
When target mep-id is specified, the operation is activated only if that MEP is in the peer MEP database.
You can verify that a MEP is in the database, using the show ethernet cfm peer meps command.
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
398
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
sla operation
To Next Page
Loading...
Need help?
General
