clear ethernet sla statistics all
To delete the contents of buckets containing SLA statistics collected by all operations probes, including
on-demand operations, use the clear ethernet sla statistics all command in EXEC mode.
clear ethernet sla statistics [current| history] all
Syntax Description
(Optional) Clears statistics for buckets currently being filled for all operations.current
(Optional) Clears statistics for full buckets for all operations.history
Clears statistics for all operations.all
Command Default
When current or history are not used, all buckets (current, old, new, half empty, and full) for all operations
(including on-demand operations) are cleared. This is equivalent to restarting the operation.
Command Modes
EXEC (#)
Command History
ModificationRelease
This command was introduced.Release 4.0.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
When you clear a bucket for a currently running probe, the remaining statistics are still collected and stored
in that bucket.
See the Usage Guidelines in the buckets size, on page 163 command for a description of buckets.
Task ID
OperationsTask ID
executeethernet-services
Examples
The following example shows how to delete the contents of all buckets containing SLA metrics collected by
all probes:
RP/0/RSP0/CPU0:router# clear ethernet sla statistics all
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
179
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
clear ethernet sla statistics all
To Next Page
Loading...
Need help?
General
