Task ID
OperationsTask ID
read, writeinterface
Examples
The following example shows how to enter the MgmtMultilink configuration mode :
RP/0/RSP0/CPU0:router# config
RP/0/RSP0/CPU0:router(config)# controller MgmtMultilink 0/1/0/0
RP/0/RSP0/CPU0:router(config-mgmtmultilink)#
Related Commands
DescriptionCommand
Displays information about the state and the number of bundles
of a multilink controller.
show controllers mgmtmultilink, on page 687
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
679
Multilink Commands on the Cisco ASR 9000 Series Router
controller MgmtMultilink
To Next Page
Loading...
Need help?
General
