show ethernet sla operations
To display information about configured Ethernet Service Level Agreement (SLA) operations, use the show
ethernet sla operations command in EXEC mode.
show ethernet sla operations [detail] [domain domain-name] [interface type interface-path-id] [on-demand
{all| id}| profile {profile-name| all}]
Syntax Description
(Optional) Displays detailed information.detail
(Optional) Displays information for the specified domain, where domain-name
is a string of a maximum of 80 characters that identifies the domain where the
SLA operation is configured.
domain domain-name
(Optional) Displays information for the specified interface type. For more
information, use the question mark (?) online help function.
interface type
Displays information for the specified interface.
Use the show interfaces command to see a list of all interfaces
currently configured on the router.
Note
For more information about the syntax for the router, use the question mark
(?) online help function.
interface-path-id
(Optional) Displays information for all on-demand operations.on-demand all
(Optional) Displays information for the specified on-demand operation, where
id is the number of the operation.
on-demand id
(Optional) Displays information for the specified profile name.
profile profile-name
(Optional) Displays information for all profiles.profile all
Command Default
No default behavior or values
Command Modes
EXEC mode
Command History
ModificationRelease
This command was introduced.Release 3.9.0
The on-demand {all | id} and profile all keyword options were
added.
Release 4.0.0
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
382
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
show ethernet sla operations
To Next Page
Loading...
Need help?
General
