EasyManuals Logo
Home>Cisco>Network Router>A9K-SIP-700

Cisco A9K-SIP-700 Command Reference Guide

Cisco A9K-SIP-700
1138 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #811 background imageLoading...
Page #811 background image
iphc profile
To create an IP header compression (IPHC) profile and enter the IPHC profile configuration mode, use the
iphc profile command in configuration mode. To remove the profile, use the no form of this command.
iphc profile profile-name type {ietf| iphc}
no iphc profile profile-name [type {ietf| iphc}]
Syntax Description
Text name for the IPHC profile. The maximum number of characters is 50.
profile-name
Specifies the type of compression format.type
Specifies Internet Engineering Task Force (IETF) standard format. Uses RFC2507
and RFC2508 compression schemes.
ietf
Specifies Internet Protocol Header Compression (IPHC) format.Provides options
similar to IETF.
iphc
Command Default
No default behavior or values
Command Modes
Configuration
Command History
ModificationRelease
This command was introduced.Release 4.0.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
After you create a profile and enter the IPHC profile configuration mode, you can configure IPHC features
in the profile and attach the profile to multiple interfaces. The maximum number of profiles allowed on a
router is 250.
A profile cannot be deleted if it is attached to any interfaces. You must remove the profile from all interfaces
first. Then, delete the profile using the no form of this command.
On-the-fly modifications to IPHC profiles are not supported.
A profile name cannot exceed 50 characters. If you attempt to create a profile name that exceeds 50 characters,
you receive the following error message:
iphc profile test1test1test1test1test1test1test1test1test1test11 type iphc
!!% 'iphc_profilemgr' detected the 'warning' condition
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
791
Serial Interface Commands on the Cisco ASR 9000 Series Router
iphc profile

Table of Contents

Other manuals for Cisco A9K-SIP-700

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco A9K-SIP-700 and is the answer not in the manual?

Cisco A9K-SIP-700 Specifications

General IconGeneral
BrandCisco
ModelA9K-SIP-700
CategoryNetwork Router
LanguageEnglish

Related product manuals