show lacp counters
To display Link Aggregation Control Protocol (LACP) statistics, enter the show lacp counters command in
EXEC mode.
show lacp counters {Bundle-Ether} bundle-id
Command Default
No default behavior or values
Command Modes
EXEC mode
Command History
ModificationRelease
This command was introduced.Release 3.7.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
readbundle
Examples
The following example shows how to display LACP counters on an Ethernet bundle:
RP/0/RSP0/CPU0:router# show lacp counters bundle-ether 1
Bundle-Ether1
LACPDUs Marker
Port Sent Received Received Resp. Sent Last Cleared
------------- ---------------------- ---------------------- ------------
Gi0/0/2/0 12 0 0 0 never
Port Excess Excess Pkt Errors
------------- ---------- ---------- ----------
Gi0/0/2/0 0 0 0
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
648
Link Bundling Commands on the Cisco ASR 9000 Series Router
show lacp counters
To Next Page
Loading...
Need help?
General
