ppp max-failure
To configure the maximum number of consecutive Configure Negative Acknowledgments (CONFNAKs) to
permit before terminating a negotiation, use the ppp max-failure command in an appropriate configuration
mode. To disable the maximum number of CONFNAKs and return to the default, use the no form of this
command.
ppp max-failure retries
no ppp max-failure
Syntax Description
Maximum number of CONFNAKs to permit before terminating a negotiation. Range
is from 2 to 10. Default is 5.
retries
Command Default
retries: 5
Command Modes
Interface configuration
Command History
ModificationRelease
This command was introduced.Release 3.9.0
This command was supported in the dynamic template configuration
mode for BNG.
Release 4.2.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
read, writeppp
read, writeaaa
Examples
The ppp max-failure command specifies that no more than three CONFNAKs are permitted before terminating
the negotiation:
RP/0/RSP0/CPU0:router# configure
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
734
PPP Commands onthe Cisco ASR 9000 Series Router
ppp max-failure
To Next Page
Loading...
Need help?
General
