Cisco A9K-SIP-700 Command Reference Guide

Task ID
OperationsTask ID
readfr
Examples
The following example shows sample output for the show frame-relay lmi-info command:
RP/0/RSP0/CPU0:router# show frame-relay lmi-info
LMI IDB Info for interface Multilink0/3/0/0/2
ifhandle: 0x6176840
Interface type: DTE
Interface state: UP
Line Protocol: UP
LMI type (cnf/oper): AUTO/CISCO
LMI type autosense: OFF
Interface MTU: 1504
-------------- DTE -------------
T391: 10s
N391: (cnf/oper): 6/5
N392: (cnf/oper): 3/0
N393: 4
My seq#: 83
My seq# seen: 83
Your seq# seen: 82
-------------- DCE -------------
T392: 15s
N392: (cnf/oper): 3/0
N393: 4
My seq#: 0
My seq# seen: 0
Your seq# seen: 0
LMI IDB Info for interface Multilink0/3/0/0/1
ifhandle: 0x6186240
Interface type: DTE
Interface state: UP
Line Protocol: UP
LMI type (cnf/oper): AUTO/CISCO
LMI type autosense: OFF
Interface MTU: 1504
-------------- DTE -------------
T391: 10s
N391: (cnf/oper): 6/5
N392: (cnf/oper): 3/0
N393: 4
My seq#: 83
My seq# seen: 83
Your seq# seen: 82
-------------- DCE -------------
T392: 15s
N392: (cnf/oper): 3/0
N393: 4
My seq#: 0
My seq# seen: 0
Your seq# seen: 0
Table 24: show frame-relay lmi-info Field Descriptions
DescriptionField
DTE
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
466
Frame Relay Commands on the Cisco ASR 9000 Series Router
show frame-relay lmi-info

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English