show controllers backplane ethernet brief
To display brief information about the Ethernet interface that connects the node to the router control Ethernet,
use the show controllers backplane ethernet brief command in EXEC mode.
show controllers backplane ethernet brief
Syntax Description
This command has no keywords or arguments.
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.7.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Examples
The following example shows the output from the show controllers backplane ethernet brief command:
RP/0/RSP0/CPU0:router# show controllers backplane ethernet brief
FastEthernet0_RP1_0 (local) is up, MTU 1514 bytes
561688 packets input, 53760372 bytes
683424 packets output, 216565877 bytes
RP/0/RSP0/CPU0:router#
Table 29: show controllers backplane ethernet brief Field Descriptions
DescriptionField
Maximum packet size, in bytes, that a particular
interface can handle.
MTU
Total number of packets received.packets input
Total number of packets transmitted.packets output
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
535
Internal Ethernet Control Network Commands on the Cisco ASR 9000 Series Router
show controllers backplane ethernet brief
To Next Page
Loading...
Need help?
General
