clear monitor-session counters
To clear the traffic mirroring session statistics, use the clear monitor-session counters command in EXEC
mode.
clear monitor-session counters [interface type interface-path-id]
Syntax Description
Identifies the interface for which the counters are to be cleared.interface
Interface type. For more information, use the question mark (?) online help
function.
type
Physical interface or virtual interface.
Use the show interfaces command to see a list of all interfaces currently
configured on the router.
Note
For more information about the syntax for the router, use the question mark (?)
online help function.
interface-path-id
Name of the monitor session to clear.
session-name
Command Default
All stored statistics for all interfaces are cleared.
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.9.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
readinterface
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
1076
Traffic Mirroring Commands on the Cisco ASR 9000 Series Router
clear monitor-session counters
To Next Page
Loading...
Need help?
General
