Examples
The following example shows how to clear the replicated ICSSO states for the specified standby interface:
RP/0/RSP0/CPU0:router# clear ppp sso state interface 0/1/0/1
The following example shows how to clear the replicated Inter-Chassis Stateful Switchover (ICSSO) states
for all interfaces on the specified node:
RP/0/RSP0/CPU0:router# clear ppp sso state all location 1/0/1
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
712
PPP Commands onthe Cisco ASR 9000 Series Router
clear ppp sso state
To Next Page
Loading...
Need help?
General
