EasyManuals Logo

Cisco A9K-SIP-700 Command Reference Guide

Cisco A9K-SIP-700
1138 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #1070 background imageLoading...
Page #1070 background image
The following example shows sample output from the show controllers t1 command for a single T1 channel:
RP/0/RSP0/CPU0:router# show controllers t1 0/4/2/0/1
T1 0/4/2/0/1 is up
mode: ATM
timeslots: 1-24
FDL per AT&T 54016 spec.
Receiver has no alarms.
Framing is ESF, Line Code is B8ZS, Clock Source is internal
Data in current interval (38 seconds elapsed):
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs
0 Unavail Secs, 0 Stuffed Secs
0 Near-end path failures, 0 Far-end path failures, 0 SEF/AIS Secs
Data in Interval 1:
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs
0 Unavail Secs, 0 Stuffed Secs
0 Near-end path failures, 0 Far-end path failures, 0 SEF/AIS Secs
Data in Interval 2:
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs
0 Unavail Secs, 0 Stuffed Secs
0 Near-end path failures, 0 Far-end path failures, 0 SEF/AIS Secs
.
.
.
The following example shows sample output from the show controllers t1 command with the tabular keyword
for a single T1 channel:
RP/0/RSP0/CPU0:router# show controllers t1 0/4/2/0/1 tabular
T1 0/4/2/0/1 is up
mode: ATM
timeslots: 1-24
FDL per AT&T 54016 spec.
Receiver has no alarms.
Framing is ESF, Line Code is B8ZS, Clock Source is internal
INTERVAL LCV PCV CSS SEFS LES DM ES BES SES UAS SSS
08:30-08:35 0 0 0 0 0 0 0 0 0 0 0
08:15-08:30 0 0 0 0 0 0 0 0 0 0 0
08:00-08:15 0 0 0 0 0 0 0 0 0 0 0
07:45-08:00 0 0 0 0 0 0 0 0 0 0 0
07:30-07:45 0 0 0 0 0 0 0 0 0 0 0
07:15-07:30 0 0 0 0 0 0 0 0 0 0 0
07:00-07:15 0 0 0 0 0 0 0 0 0 0 0
06:45-07:00 0 0 0 0 0 0 0 0 0 0 0
06:30-06:45 0 0 0 0 0 0 0 0 0 0 0
06:15-06:30 0 0 0 0 0 0 0 0 0 0 0
06:00-06:15 0 0 0 0 0 0 0 0 0 0 0
05:45-06:00 0 0 0 0 0 0 0 0 0 0 0
05:30-05:45 0 0 0 0 0 0 0 0 0 0 0
05:15-05:30 0 0 0 0 0 0 0 0 0 0 0
.
.
.
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
1050
T3, E3, T1, E1 Controller Commands on the Cisco ASR 9000 Series Router
show controllers t1

Table of Contents

Other manuals for Cisco A9K-SIP-700

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco A9K-SIP-700 and is the answer not in the manual?

Cisco A9K-SIP-700 Specifications

General IconGeneral
BrandCisco
ModelA9K-SIP-700
CategoryNetwork Router
LanguageEnglish

Related product manuals