Examples
In this example, the 32-bit CRC on POS interface 0/1/0/2 is enabled:
rack/slot/module(config)# interface POS 0/1/0/2
rack/slot/module(config-if)# POS
rack/slot/module(config-if-pos)# crc 32
Related Commands
DescriptionCommand
Specifies a number of flag sequences to be inserted between the
packets.
transmit-delay, on page 707
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
695
Packet-over-SONET Interface Commands on the Cisco ASR 9000 Series Router
crc (POS)
To Next Page
Loading...
Need help?
General
