Task ID
OperationsTask ID
read, writehdlc
read,writeppp
Examples
This example shows how to configure keepalives for 3 seconds on POS interface 0/7/0/1:
RP/0/RSP0/CPU0:router(config)# interface POS 0/7/0/1
RP/0/RSP0/CPU0:router(config-if)# keepalive 3
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
701
Packet-over-SONET Interface Commands on the Cisco ASR 9000 Series Router
keepalive (POS)