EasyManuals Logo

Cisco A9K-SIP-700 Command Reference Guide

Cisco A9K-SIP-700
1138 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #773 background imageLoading...
Page #773 background image
Examples
In the following example, PPP timeout authentication is set to 20 seconds:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# interface POS 0/3/0/1
RP/0/RSP0/CPU0:router(config-if)# encapsulation ppp
RP/0/RSP0/CPU0:router(config-if)# ppp timeout authentication 20
Related Commands
DescriptionCommand
Specifies one or more authentication, authorization,
and accounting (AAA) methods for use on serial
interfaces running PPP.
aaa authentication ppp
Enables CHAP, MS-CHAP, or PAP, and specifies
the order in which CHAP, MS-CHAP, and PAP
authentication is selected on the interface.
ppp authentication , on page 720
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
753
PPP Commands onthe Cisco ASR 9000 Series Router
ppp timeout authentication

Table of Contents

Other manuals for Cisco A9K-SIP-700

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco A9K-SIP-700 and is the answer not in the manual?

Cisco A9K-SIP-700 Specifications

General IconGeneral
BrandCisco
ModelA9K-SIP-700
CategoryNetwork Router
LanguageEnglish

Related product manuals