Examples
The following example shows how to configure the maximum allowed time between context refreshes as 60
seconds, in the IPHC profile ‘Profile 1’:
RP/0/RSP0/CPU0:router(config)# config
RP/0/RSP0/CPU0:router(config)# iphc profile Profile_1 type iphc
RP/0/RSP0/CPU0:router(config-iphc-profile)# refresh max-time 60
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
804
Serial Interface Commands on the Cisco ASR 9000 Series Router
refresh max-time
To Next Page
Loading...
Need help?
General
