OperationsTask ID
readcisco-support
Examples
The following example shows how to display IPv4, Real Time Protocol (RTP), User Datatgram Protocol
(UDP), and Non-Transmission Control Protocol (non-TCP) statistics about IP header compression (IPHC)
packets sent and received on an interface:
RP/0/RSP0/CPU0:router# show iphc ipv4 rtp interface Serial 0/1/0/1/26:0
Thu Jan 8 20:28:47.569 UTC
RTP/UDP/IP header compression statistics:
Interface Serial0/1/0/1/26:0
Rcvd: 100 total, 93 compressed, 7 full header
0 dropped, 0 status msgs
Sent: 0 total, 0 compressed, 0 fullheader, 0 status msgs
0 bytes saved, 0 bytes sent
1.00 efficiency improvement factor
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
813
Serial Interface Commands on the Cisco ASR 9000 Series Router
show iphc ipv4 rtp
To Next Page
Loading...
Need help?
General
