Examples
The following example shows how to specify AU 1.
RP/0/RSP0/CPU0:router(config)# controller sonet 0/1/0/0
RP/0/RSP0/CPU0:router(config-sonet)# au 1
RP/0/RSP0/CPU0:router(config-auPath)#
Related Commands
DescriptionCommand
Specifies the tributary unit group (TUG) number and enters the TUG3
controller configuration mode.
tug3, on page 927
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
845
SONET Controller Commands on the Cisco ASR 9000 Series Router
au
To Next Page
Loading...
Need help?
General
