Examples
The following example enables authentication for APS group 1 in abctown:
RP/0/RSP0/CPU0:router(config)# aps group 1
RP/0/RSP0/CPU0:router(config-aps)# authenticate abctown
Related Commands
DescriptionCommand
Adds an automatic protection switching (APS) group and enter APS
group configuration mode.
aps group (global), on page 842
Assigns local SONET physical ports as SONET APS channels in the
current APS group.
channel local, on page 849
Assigns a port and interface that is physically located in a remote router
as a SONET working or protect APS channel.
channel remote, on page 851
Displays the operational status for all configured SONET APS groups.show aps, on page 893
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
847
SONET Controller Commands on the Cisco ASR 9000 Series Router
authenticate (PGP)
To Next Page
Loading...
Need help?
General
