Examples
In the following examples, a remote channel with IP address 192.168.1.1 is assigned as the working channel:
RP/0/RSP0/CPU0:router(config)# aps group 1
RP/0/RSP0/CPU0:router(config-aps)# channel 1 remote 192.168.1.1
Related Commands
DescriptionCommand
Adds an automatic protection switching (APS) group and enter APS
group configuration mode.
aps group (global), on page 842
Assigns local SONET physical ports as SONET APS channels in the
current APS group.
channel local, on page 849
Displays the operational status for all configured SONET APS groups.show aps, on page 893
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
852
SONET Controller Commands on the Cisco ASR 9000 Series Router
channel remote
To Next Page
Loading...
Need help?
General
