The following example sets the signaling to SONET:
RP/0/RSP0/CPU0:router(config)# aps group 1
RP/0/RSP0/CPU0:router(config-aps)# signalling sonet
Related Commands
DescriptionCommand
Adds an automatic protection switching (APS) group and enter
APS group configuration mode.
aps group (global), on page 842
Displays information about the APS groups.show aps group, on page 897
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
919
SONET Controller Commands on the Cisco ASR 9000 Series Router
signalling
To Next Page
Loading...
Need help?
General
