Examples
The following example shows how to specify a width of 3:
RP/0/0/CPU0:router(config)# controller sonet 0/1/0/0
RP/0/0/CPU0:router(config-sonet)# sts 1
RP/0/0/CPU0:router(config-stsPath)# width 3
Related Commands
DescriptionCommand
Sets the mode of an STS path, AU path, T3 controller, or TUG3
controller.
mode (SONET), on page 874
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
933
SONET Controller Commands on the Cisco ASR 9000 Series Router
width
To Next Page
Loading...
Need help?
General
