Task ID
OperationsTask ID
read, writedwdm
read, writeinterface
read, writesonet-sdh
Examples
The following example shows how to clear controller data for T3 controller 1 that is located in chassis 0, for
a SIP installed in slot 6 with a SPA in subslot 2, and port 0 with T3 controller 1:
RP/0/RSP0/CPU0:router(config)# controller t3 0/6/2/0/1
Related Commands
DescriptionCommand
Configures a T3 controller and enters T3 configuration mode.controller t3, on page 976
Displays information about the T3 links and hardware and software
drivers for the T3 controller.
show controllers t3, on page 1054
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
965
T3, E3, T1, E1 Controller Commands on the Cisco ASR 9000 Series Router
clear controller t3
To Next Page
Loading...
Need help?
General
