Task ID
OperationsTask ID
read, writeinterface
Examples
The following example shows how to enter E3 configuration mode for a controller in slot 6, on the SPA in
subslot 2, on E3 controller 0:
RP/0/RSP0/CPU0:router(config)# controller e3 0/6/2/0
RP/0/RSP0/CPU0:router(config-e3)#
Related Commands
DescriptionCommand
Displays information about the E3 links and hardware and software
drivers for the E3 controller.
show controllers e3, on page 1038
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
973
T3, E3, T1, E1 Controller Commands on the Cisco ASR 9000 Series Router
controller e3
To Next Page
Loading...
Need help?
General
