CONSOLE AI | Adding Devices (CP2) | 134
Option Description
Inband DTMF Relay is more likely to work on lossless
codecs, such as G.711. The SIP Info method works
only on SIP dial peers.
Dynamic Payload Type
RTP Starting Port The starting port for RTP sessions. Default: 30000. Min: 1025.
Max: 65535.
RTP Range The number of ports that can be used for RTP sessions.
Default: 200. Min: 10. Max: 5000.
DialPlan A VoIP dial plan. For more information, see VoIP Dial Plan
Syntax. Default dial plan is:
911 | 0 | [1-7]xxx | 8xxxxxxx | 91xxxxxxxxxx |
9011x.L
Debug Level The level of logging that occurs. Leave this as is unless
directed by ClearOne Customer Support for troubleshooting
purposes. Default is Debug.
Codec Priority The order of preferred codecs to attempt to use. If the device
can’t negotiate the first codec on the list, the second one will
be attempted next, etc.
Enable SIP Logging Whether to turn on SIP logging for troubleshooting purposes.
8. (Optional) Select the Proxy 1 or Proxy 2 tab and change any of the settings (described in the table
below).
Note:
The Proxy 2 server is used only if the connection to the Proxy 1 server fails.
CONSOLE AI User Manual
To Next Page
Loading...
