CONSOLE AI | Managing Channels (CP2) | 247
17.Change any of the Compressor options, as described in the table below.
Option Description
Enable Compressor Check the check box to activate the compressor on this channel.
Group Use the Group radio buttons to assign this compressor to a
compressor group. The default is None. When you assign a
compressor to a compressor group—such as a group of two
compressors configured for left and right stereo channels—the
compressors will monitor each other. When one channel compresses,
all compressors in the group compress together.
Enable Delay Mode Turning on delay mode gives the compressor time to make
compression adjustments before the signal is sent to other channels.
This can useful for making sure that a signal doesn’t exceed a
threshold that might damage a speaker, for example.
Delay The amount of the delay (in ms).
Post Compression Gain A level adjustment made after compression has occurred.
CONSOLE AI User Manual
To Next Page
Loading...
