ClearOne CONVERGE Huddle - Page 265

CONSOLE AI | Managing Channels (CP2) | 265
22.You can change the gain in any of the following ways:
• Drag the slider
• Type a value in the text box
• Click the incrementer and decrementer arrows beside the text box to set the value
Polarity
23.To reverse the polarity of the output channel, click the Polarity button.
If the polarity is reversed the button turns light green.
EQ Filter
24.To enable and configure an equalizer filter, click the EQ Filter button.
The Graphic EQ dialog box appears:
25.You can change the gain value for any of the frequency ranges in any of the following ways:
• Drag the slider
• Type a value in the text box
• Click the incrementer and decrementer arrows beside the text box to set the value
26.Click Close.
Limiter
27.To enable and configure a limiter, click the Limiter button.
The Limiter dialog box appears:
CONSOLE AI User Manual