D-Link xStack DGS-3420 Series - Page 100

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
95
4-45 config tacacs+ server_host
Description
This command is used to configure the TACACS+ server host.
Format
config tacacs+ server_host <ipaddr> {port <int 1-65535> | [key [<key_string 254> | none] |
encryption_key <key_string 344>] | timeout <int 1-255>}
Parameters
<ipaddr> - Enter the IP address of the server host.
port - (Optional) The port number of the TACACS+ server host.
<int 1-65535> - Enter the value between 1 and 65535. The default value is 49.
key - (Optional) Specify the key for TACACS+.
<key_string 254> - Enter the plain text key string for TACACS+.
none - No encryption for RADIUS.
encryption_key - (Optional) The encrypted form key string for TACACS+. The encryption
algorithm is based on DES.
<key_string 344> - Etner the string with maximum 344 characters.
timeout - (Optional) Specify the time in second to wait for the server to reply.
<int 1-255> - Enter the value between 1 and 255. The default value is 5.
Restrictions
Only Administrator level can issue this command.
Example
To configure the TACACS+ server host:
DGS-3420-28SC:admin#config tacacs+ server_host 10.1.1.211 key "abcd123"
Command: config tacacs+ server_host 10.1.1.211 key "abcd123"
Success.
DGS-3420-28SC:admin#
4-46 create xtacacs server_host
Description
This command is used to
Format
create xtacacs server_host <ipaddr> {port <int 1-65535> | timeout <int 1-255> | retransmit <int
1-20>}