D-Link xStack DGS-3420 Series - Disable Sntp; Config Time

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
966
Example
To enable SNTP:
DGS-3420-28SC:admin#enable sntp
Command: enable sntp
Success.
DGS-3420-28SC:admin#
26-5 disable sntp
Description
This command is used to turn off SNTP support.
Format
disable sntp
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable SNTP:
DGS-3420-28SC:admin#disable sntp
Command: disable sntp
Success.
DGS-3420-28SC:admin#
26-6 config time
Description
This command is used to change the time settings.
Format
config time <date ddmthyyyy> <time hh:mm:ss>