D-Link xStack DGS-3420 Series - Delete Vlan Vlanid; Config Vlan

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
1026
DGS-3420-28SC:admin#
32-4 delete vlan vlanid
Description
This command is used to delete a previously configured VLAN ID on the switch.
Format
delete vlan vlanid <vidlist>
Parameters
<vidlist> - Specify a range of VLAN ID to be deleted.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To remove a VLAN ID 2:
DGS-3420-28SC:admin#delete vlan vlanid 2
Command: delete vlan vlanid 2
Success.
DGS-3420-28SC:admin#
32-5 config vlan
Description
This command is used to add or delete ports to or from the port list of a previously configured VLAN.
Users can specify the additional ports as tagged, untagged, or forbidden.
Format
config vlan <vlan_name 32> {[add [tagged | untagged | forbidden] | delete] <portlist> |
advertisement [enable | disable]}(1)
Parameters
<vlan_name 32> - Specify the name of the VLAN to add or delete ports to. The maximum length is
32 characters.
add - Specify the port attribute to add.