xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
882
ReadView Name : CommunityView
WriteView Name :
Notify View Name : CommunityView
Security Model : SNMPv2
Security Level : NoAuthNoPriv
Group Name : private
ReadView Name : CommunityView
WriteView Name : CommunityView
Notify View Name : CommunityView
Security Model : SNMPv2
Security Level : NoAuthNoPriv
Total Entries: 3
15-5 create snmp view
Description
This command is used to assign views to community strings to limit which MIB objects an SNMP
manager can access.
Format
create snmp view <view_name 32> <oid> view_type [included | excluded]
Parameters
<view_name 32> - Specify the view name to be created.
<oid> - Specify the object-identified tree (the MIB tree).
view_type - Specify the access type of of the MIB tree in this view.
included - Specify to include this view.
excluded - Specify to exclude this view.
Restrictions
Only Administrator-level users can issue this command.
Example
To assign views to community strings to limit which MIB objects an SNMP manager can access:
DGS-3420-28SC:admin#create snmp view dlinkview 1.3.6 view_type included
Command: create snmp view dlinkview 1.3.6 view_type included