D-Link xStack DGS-3420 Series - Clear Dhcp Binding

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
320
Format
delete dhcp pool manual_binding <pool_name 12> [<ipaddr> | all]
Parameters
<pool_name 12> - Specify the DHCP pool name.
<ipaddr> - Specify the IP address which will be assigned to a specified client.
all - Specify to delete all manual binding IP addresses from the specified pool.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete DHCP server manual binding:
DGS-3420-28SC:admin#delete dhcp pool manual_binding engineering 10.10.10.1
Command: delete dhcp pool manual_binding engineering 10.10.10.1
Success.
DGS-3420-28SC:admin#
22-27 clear dhcp binding
Description
This command is used to clear a binding entry or all binding entries in a pool or clears all binding
entries in all pools. Note that this command will not clear the dynamic binding entry which matches a
manual binding entry.
Format
clear dhcp binding [<pool_name 12> [<ipaddr> | all] | all]
Parameters
<pool_name 12> - Specify the DHCP pool name to clear.
<ipaddr> - Specify the IP address to clear.
all - Specify to clear all IP addresses for the specified pool.
all - Specify to clear all binding entries in all pools
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.