D-Link xStack DGS-3420 Series - Show Lldp

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
581
DGS-3420-28SC:admin#config lldp message_tx_hold_multiplier 3
Command: config lldp message_tx_hold_multiplier 3
Success.
DGS-3420-28SC:admin#
To configure the delay-interval interval:
DGS-3420-28SC:admin#config lldp tx_delay 8
Command: config lldp tx_delay 8
Success.
DGS-3420-28SC:admin#
To change the re-initialization delay interval to five seconds:
DGS-3420-28SC:admin#config lldp reinit_delay 5
Command: config lldp reinit_delay 5
Success.
DGS-3420-28SC:admin#
51-4 show lldp
Description
This command is used to display LLDP.
Format
show lldp
Parameters
None.
Restrictions
None.
Example
To display LLDP:
DGS-3420-28SC:admin#show lldp