xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
1057
34-15 show wac user
Description
This command is used to display WAC user accounts.
Format
show wac user
Parameters
None.
Restrictions
None.
Example
To show Web authentication user accounts:
DGS-3420-28SC:admin# show wac user
Command: show wac user
User Name Password VID
----------------- ----------------- ---------
123 ************ 1000
Total Entries : 1
34-16 show wac auth_state ports
Description
This command is used to display the authentication state for ports.
Format
show wac auth_state ports {<portlist>}
Parameters
<portlist> - (Optional) Specify the list of ports whose WAC authentication state will be displayed.