xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
9
Chapter 2
Basic Management
Commands
create account [admin | operator | power_user | user] <username 15> {encrypt [plain_text | sha_1]
<password>}
enable password encryption
disable password encryption
config account <username 15> {encrypt [plain_text | sha_1] <password>}
delete account <username 15>
config temperature [trap | log] state [enable | disable]
config temperature threshold {high <temperature -500-500> | low <temperature -500-500>}(1)
config serial_port {baud_rate [9600 | 19200 | 38400 | 115200] | auto_logout [never | 2_minutes |
5_minutes | 10_minutes | 15_minutes]}(1)
enable telnet {<tcp_port_number 1-65535>}
enable web {<tcp_port_number 1-65535>}
save {[config <pathname> | log | all]}
reset {[config | system]} {force_agree}
config terminal width [default | <value 80-200>]
2-1 create account
Description
This command creates user accounts. The username is between 1 and 15 characters, the password is
between 0 and 15 characters. The number of accounts (including admin, operator, power-user and
user) is up to eight.
Format
create account [admin | operator | power_user | user] <username 15> {encrypt [plain_text |
sha_1] <password>}
To Next Page
Loading...
Need help?
General