D-Link xStack DGS-3420 Series - Show Wac

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
1055
vlan - Specify the authentication VLAN name.
<vlan_name 32> - Specify the authentication VLAN name. The VLAN name can be up to 32
characters long.
vlanid - Specify the authentication VLAN ID.
<vlanid 1-4094> - Specify the authentication VLAN ID. The VLAN ID must be between 1 and
4094.
clear_vlan - Specify to clear the specified VLAN.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the user’s VLAN:
DGS-3420-28SC:admin# config wac user abc vlanid 100
Command: config wac user abc vlanid 100
Enter a old password:**
Enter a case-sensitive new password:**
Enter the new password again for confirmation:**
Success.
DGS-3420-28SC:admin#
34-13 show wac
Description
This command is used to display the WAC global setting.
Format
show wac
Parameters
None.
Restrictions
None.
Example
To show WAC:
DGS-3420-28SC:admin# show wac