D-Link xStack DGS-3420 Series - Chapter 8 Ripng Commands

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
833
Chapter 8 RIPng Commands
enable ripng
disable ripng
show ripng {ipif <ipif_name 12>}
config ripng {method [no_horizon | split_horizon | poison_reverse] | update <sec 5-65535> |
expire <sec 1-65535> | garbage_collection <sec 1-65535>}(1)
config ripng ipif [<ipif_name 12> | all] {state [enable | disable] | metric <value 1-15>}(1)
8-1 enable ripng
Description
This command is used to enable RIPng globally for the Switch.
Format
enable ripng
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable RIPng globally:
DGS-3420-28SC:admin# enable ripng
Command: enable ripng
Success.
DGS-3420-28SC:admin#
8-2 disable ripng
Description
This command is used to disable RIPng globally for the Switch.