D-Link xStack DGS-3420 Series User Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
165
Format
enable autoconfig
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To enable DHCP auto configuration status:
DGS-3420-28SC:admin#enable autoconfig
Command: enable autoconfig
Success.
DGS-3420-28SC:admin#
10-3 disable autoconfig
Description
This command is used to disable automatically to get configuration from a TFTP server.
Format
disable autoconfig
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To disable the DHCP auto configuration status:

D-Link xStack DGS-3420 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3420 Series
Category	Switch
Language	English