To Next Page

To Previous Page

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide

668

Chapter 59

MLD Snooping

Multicast (MSM) VLAN

Commands

create mld_snooping multicast_vlan <vlan_name 32> <vlanid 2-4094> {remap_priority [<value 0-7>

| none] {replace_priority}}

config mld_snooping multicast_vlan <vlan_name 32> {[add | delete] [member_port <portlist> |

[source_port <portlist> | untag_source_port <portlist>] | tag_member_port <portlist>] | state

{replace_priority}}(1)

create mld_snooping multicast_vlan_group_profile <profile_name 1-32>

config mld_snooping multicast_vlan_group_profile <profile_name 1-32> [add | delete]

<mcastv6_address_list>

delete mld_snooping multicast_vlan_group_profile [profile_name <profile_name 1-32> | all]

show mld_snooping multicast_vlan_group_profile {<profile_name 1-32>}

config mld_snooping multicast_vlan_group <vlan_name 32> [add | delete] profile_name

<profile_name 1-32>

show mld_snooping multicast_vlan_group {<vlan_name 32>}

delete mld_snooping multicast_vlan <vlan_name 32>

enable mld_snooping multicast_vlan

disable mld_snooping multicast_vlan

show mld_snooping multicast_vlan {<vlan_name 32>}

config mld_snooping multicast_vlan forward_unmatched [disable | enable]

config mld_snooping multicast_vlan auto_assign_vlan [enable | disable]

59-1 create mld_snooping multicast_vlan

Description

This command is used to create an MLD snooping multicast VLAN and implements relevant

parameters as specified. More than one multicast VLAN can be configured. Newly created MLD

snooping multicast VLANs must use a unique VLAN ID and name, i.e. they cannot use the VLAN ID or

name of any existing 802.1q VLAN. Also keep in mind the following conditions: multicast VLANs

cannot be configured or displayed using 802.1Q VLAN commands and the multicast VLAN snooping

function co-exists with the 802.1q VLAN snooping function.

Format

create mld_snooping multicast_vlan <vlan_name 32> <vlanid 2-4094> {remap_priority [<value

0-7> | none] {replace_priority}}

Parameters

<vlan_name 32> - Specify the name of the multicast VLAN to be created. Each multicast VLAN is

D-Link xStack DGS-3420 Series User Manual

Questions and Answers: