xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
851
DGS-3420-28SC:admin#enable sflow
Command: enable sflow
Success.
12-2 disable sflow
Description
This command is used to disable the sFlow function.
Format
disable sflow
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To disable the sFlow function:
DGS-3420-28SC:admin#disable sflow
Command: disable sflow
Success.
12-3 show sflow
Description
This command is used to display sFlow information.
Format
show sflow
To Next Page
Loading...
