xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
197
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete a previously created maintenance domain:
DGS-3420-28SC:admin#delete cfm md op_domain
Command: delete cfm md op_domain
Success.
14-10 enable cfm
Description
This command is used to enable the CFM globally.
Format
enable cfm
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable the CFM globally:
DGS-3420-28SC:admin#enable cfm
Command: enable cfm
Success.
To Next Page
Loading...
