D-Link xStack DGS-3420 Series - Show Scheduling

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
802
5-7 show scheduling
Description
This command is used to display the current traffic scheduling parameters.
Format
show scheduling {<portlist>}
Parameters
<portlist> - (Optional) Specifies the range of ports to be displayed.
Restrictions
None.
Example
To display the traffic scheduling parameters for each CoS queue:
DGS-3420-28SC:admin#show scheduling
Command: show scheduling
QOS Output Scheduling On Port: 1
Class ID Weight
-------- ------
Class-0 1
Class-1 2
Class-2 3
Class-3 4
Class-4 5
Class-5 6
Class-6 7
Class-7 8
QOS Output Scheduling On Port: 2
Class ID Weight
-------- ------
Class-0 1
Class-1 2
Class-2 3
Class-3 4
Class-4 5
Class-5 6
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
To display the traffic scheduling parameters for each CoS queue on port 1: